ผศ.ดร.พชรพล ตัณฑวิรุฬห์
ผศ.ดร.พชรพล ตัณฑวิรุฬห์
Asst.Prof.Dr. Phacharaphon Tunthawiroon
Education
· Ph.D. (Materials Processing) Tohoku University, Japan
· วศ.ม. (วิศวกรรมเครื่องกล)สถาบันเทคโนโลยีพระจอมเกล้าเจ้าคุณทหารลาดกระบัง
· วศ.บ. (วิศวกรรมเครื่องกล) สถาบันเทคโนโลยีราชมงคล ธัญบุรี
Research Interest
·Development of heat resistant alloys, (Fe, Co- based alloys)
· Oxidation and Corrosion
· High Temperature Fatigue (Iso-thermal and Thermo-mechanical fatigue)
Contact
โทรศัพท์: 02-329-8339 ต่อ 121
Email: phacharaphon.tu@kmitl.ac.th
Publications
Peer-Reviewed Journal Articles
[1] Phacharaphon Tunthawiroon, Yunping Li, Yuichiro Koizumi, Akihiko Chiba, Strain-controlled iso-thermal fatigue behavior of Co–29Cr–6Mo used for tooling materials in Al die casting, Materials Science and Engineering A, 703 (2017) 27-36.
[2] Phacharaphon Tunthawiroon, Yunping Li, Akihiko Chiba, Influences of alloyed Si on the corrosion resistance of Co–Cr–Mo alloy to molten Al by iso-thermal oxidation in air. Corrosion Science, 100 (2015), 428-434.
[3] Phacharaphon Tunthawiroon, Yunping Li, Ning Tang, Akihiko Chiba, Effects of alloyed Si on the oxidation behaviour of Co-29Cr-6Mo alloy for solid-oxide fuel cell interconnects. Corrosion Science 95 (2015) 88-99.
[4] Ning Tang, Yunping Li, Phacharaphon Tunthawiroon, Yuichiro Koizumi, Akihiko Chiba , Thermo-mechanical fatigue test of a wrought Co-based alloy as potential tooling material for die casting, Materials Science and Engineering A, 615 (2014) 164-168.
[5] Yunping Li, Phacharaphon Tunthawiroon, Ning Tang, Huakang Bian, Fenglin Wang, Shihai Sun, Yan Chen, Kazuyo Omura, Yuichiro Koizumi, Akihiko Chiba, Effects of Al, Ti and Zr doping on oxide film formation in Co-29Cr-6Mo alloy used as mould materials for Al die-casting, Corrosion Science 84 (2014) 147-158.
[6] Phacharaphon Tunthawiroon, Yunping Li, Ning Tang, Akihiko Chiba, Enhancement of corrosion resistance of Fe–Cr–Mo alloy to molten Al by thermal oxidation in air, Corrosion Science 77 (2013) 97–102.
[7] Yunping Li, Ning Tang, Phacharaphon Tunthawiroon, Yuichiro Koizumi, Akihiko Chiba, Characterisation of oxide films formed on Co-29Cr-6Mo alloy used in die-casting moulds for aluminium, Corrosion Science 73 (2013) 72-79.
Selected Conference Papers
[1] Chayanon Kajai, Mettaya Kitiwan and Phacharaphon Tunthawiroon, Microstructure and mechanical property evolution of hot-rolled Co–Cr–Mo–xSi alloys during aging treatment, The 4th International Conference on Engineering, Applied Sciences and Technology (ICEAST 2018), Phuket, Thailand.
[2] Chonlawit Peaubuapuan, Phacharaphon Tunthawiroon, Kannachai Kanlayairi, Chumpol Yuangyai, Effect of Si on Microstructure and Corrosion Behavior of CoCrMo Alloys, 2018 9th International Conference on Mechatronics and Manufacturing (ICMM 2018), Phuket, Thailand.
[3] Niwat Mookam, Phacharaphon Tunthawiroon, Kannachai Kanlayairi, Effects of copper content in Sn-based solder on the intermetallic phase formation and growth during soldering, 2018 9th International Conference on Mechatronics and Manufacturing (ICMM 2018), Phuket, Thailand.
[4] Phacharaphon Tunthawiroon, Kannachai kanlayasiri, Akihiko Chiba, Surface characterization of Si-doped Co–Cr–Mo alloy oxidized at high temperature, Reginal conference on materials & Asian Microscopy Conference 2017, University Sains Malaysia, Peanag, Malaysia
[5] Phacharaphon Tunthawiroon, Yunping Li, Ning Tang, Akihiko Chiba, Thermo-mechanical fatigue behaviour of Co–Cr–Mo alloys under Al die casting condition, The Japan institute of metals and materials meeting, 153,17-19 September 2013, Kanazawa University.
[6] Phacharaphon Tunthawiroon, Yunping Li, Ning Tang, Akihiko Chiba, Effect of Si addition on oxidation behaviour of Co–Cr–Mo alloy, Association of Japan plastic deformation, meeting of young engineer, 14 December 2013, Sendai.
[7] Phacharaphon Tunthawiroon, Yunping Li, Ning Tang, Akihiko Chiba, Thermo-mechanical fatigue behaviour of Co–Cr–Mo alloys under Al die casting condition, 第12 回日本金属学会東北支部研究発表大会, 13 January 2014, Sendai. (Poster)
[8] Phacharaphon Tunthawiroon, Yunping Li, Ning Tang, Akihiko Chiba, Effect of Si addition on oxidation behaviour of Co–Cr–Mo alloy, The Japan institute of metals and materials meeting, 154, 21-23 March 2014, Tokyo Institute of Technology.
[9] Phacharaphon Tunthawiroon, Yunping Li, Ning Tang, Akihiko Chiba, Strain controlled iso-thermal fatigue behaviour of Co–Cr–Mo, The Japan institute of metals and materials meeting, 155, 24-26 September 2014, Nagoya University.
[10] Phacharaphon Tunthawiroon, Yunping Li, Kenta Yamanaka, Yuichiro Koizumi, Akihiko Chiba, Influences of alloyed Si on the corrosion resistance of Co–Cr–Mo alloy to molten Al by iso-thermal oxidation in air, The Japan institute of metals and materials meeting, 157, 16-18 September 2015, Kyusyu University.
[11] Phacharaphon Tunthawiroon, Yunping Li, Ning Tang, Akihiko Chiba, 5th International symposium on advanced ceramic and 3th International symposium on advanced synthesis and processing technology for materials, Wuhan University, China, 9-12 December 2013. Title “Thermo-mechanical fatigue behaviour of Co–Cr–Mo alloys under Al die casting condition”.
[12] Phacharaphon Tunthawiroon, Yunping Li, Yuichiro Koizumi, Akihiko Chiba, Japan-Russia Joint Seminar "Advanced Materials Synthesis Process and Nanostructure" in conjunction with 2014 Annual Meeting of Excellent Graduate Schools for "Materials Integration Center" and "Materials Science Center, Akiu, Sendai, Japan, 9-10 March 2015. Title “Strain controlled iso-thermal fatigue behaviour of Co–Cr–Mo alloy as potential tooling materials for Al die casting”. (Poster)
